View LC320W01-SLA1_4150293.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 32.0 wxga tft lcd title model general buyer *when you obtain standard approval, please use the above model name without suffix lc320w01 *model sla1 suffix lg.philips lcd co., ltd. supplier tv product development dept. lg. philips lcd co., ltd d.w. lee / engineer h.i. jang / senior manager signature date ) ) ( ( final specification preliminary specification please return 1 copy for your confirmation with your signature and comments. / / / signature date approved by for approval specification reviewed by prepared by approved by this product must be used for a tv application this is not designed for the public display. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 2 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 27 precautions 9 27 mounting precautions 9-1 27 operating precautions 9-2 28 electrostatic discharge control 9-3 28 precautions for strong light exposure 9-4 28 storage 9-5 28 handling precautions for protection film 9-6 14 8 interface connections 3-2 color input data reference 3-5 26 designation of lot mark 8-1 26 packing form 8-2 26 packing 8 25 emc 7-2 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 6 electrical specifications 3 6 electrical characteristics 3-1 12 signal timing specifications 3-3 13 signal timing waveforms 3-4 15 power sequence 3-6 17 optical specifications 4 21 mechanical characteristics 5 24 reliability 6 25 international standards 7 25 safety 7-1 page item number contents www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 3 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 preliminary specification - jan. 23. 2007 0.0 description page revision date revision no record of revisions www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 4 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 general features viewing angle free ( r/l 178(typ.), u/d 178(typ.)) (0rt polarizer applied) viewing angle (cr>10) 8bit, 16,7 m colors color depth 1366 horiz. by 768 vert. pixels rgb stripe arrangeme nt pixel format 500 cd/m 2 (center 1 point) (typ.) luminance, white total 113.70watt (typ.) (logic=3.70 w, lamp=110w [i bl =112ma] ) power consumption 6,050g (typ.) weight transmissive mode, normally black display operating mode hard coating(3h), anti-glare treatment of the front polarizer surface treatment 170.25 x 510.75 x rgb pixel pitch 760.0 mm(h) x 450.0 mm(v) x 48.0 mm(d) (typ.) outline dimension 31.51 inches(800.4mm) diagonal active screen size 1. general description the lc320w01 is a color active matrix liquid crystal display with an int egral external electrode fluorescent lamp(eefl) backlight system. the matrix employs a-si thin film transistor as the active element. it is a transmissive type display operating in the normally black mode. it has a 31.51 inch diagonally measured active display area with wxga resolution ( 768 vertical by 1366 horizontal pixel array). each pixel is divided into red, green and blue sub-pixels or dots which are ar ranged in vertical stripes. gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of more than 16.7m(true) colors. it has been designed to apply the 8-bit 1-port lvds interface. it is intended to support lcd tv, pctv where high brightness, super wide viewing angle, high color gamut, high color depth and fast response time are important. cn1 (30pin) lvds 5pair power circuit block source driver circuit s1 s1366 rgb tft - lcd panel (1366 rgb 768 pixels) g1 g768 gate driver circuit +12.0v dcr lut, odc lut cn3 lut data select #9 dcr_enable #10 v br_ext #27 v br_out #28 lut data lvds rx (receiver) dcr controller odc controller timing controller back light assembly (16eefl) cn2, inverter (master, 14pin, high) sync. pwm +24.0v v br -a, v br -b on/off www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 5 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 table 1. absolute maximum ratings v dc +5.0 -0.3 v br brightness control voltage note 1,2 c 50 0 t op operating temperature when operating v dc +27.0 21.6 v bl backlight inverter lcm unit %rh 90 10 h op operating ambient humidity %rh 90 10 h st storage humidity c 60 -20 t st storage temperature v dc +5.5 -0.3 von/off on/off control voltage v dc +14.0 -0.3 v lcd power input voltage max min parameter remark value symbol 2. absolute maximum ratings the following items are maximum values which, if exceeded, may cause faulty operati on or damage to the lcd module. note 1. temperature and relative humidity range are shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. 2. abnormal visual problems by the surface temperature of front panel side can be oc curred in specific range (higher than 55 c). but materials ( ex : polarize stuff ) are not damaged permanently in this range. temperature and relative humidity

c

10 20 30 40 50 60 70 80 0 -20 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 6 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 table 2-1. electrical characteristics mosaic pattern(8 x 6) white : 255gray black : 0gray 3. electrical specifications 3-1. electrical characteristics it requires two power inputs. one is employed to power for the lcd circuit. the other input power for the eefl/backlight is to power inverter. notes : 1. the specified current and power consumption are under the v lcd =12.0v, 25 2 c, f v =60hz condition whereas mosaic pattern(8 x 6) is displayed and f v is the frame frequency. 2. the current is specified at the maximum current pattern. 3. the duration of rush current is about 2ms and rising time of power input is 1ms (min.). 1 ma 403 310 - 1 watt 4.8 3.7 - p lcd power consumption 3 a 3.0 - - i rush rush current v dc 12.6 12.0 11.4 v lcd power input voltage 2 ma 494 380 - i lcd power input current module : parameter symbol max typ min note unit value www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 7 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 table 2_2. electrical characteristics mvp-p 400 - - v rp permissible input ripple voltage 3 hrs - 60,000 50,000 v br -a=1.65v life time 2 v dc 3.3 - 0 v bl =24v v br -a = 1.65v v br -b v dc 3.3 1.65 0 v br -a brightness adj (analog mode) watt 132 120 v bl =24v, v br -a=3.3v inverter : 1, 3 122 110 - v bl =24v, v br Ca=1.65v p bl power consumption brightness adj (burst mode) lamp 1, 3 1, 3 not e max. typ. min. v dc 25.2 24.0 22.8 v bl input voltage v dc 0.5 -0.3 lamp off =low a 5.1 4.58 - v br -a(typ) = 1.65v v bl =24v v br -b = 3.3v v dc 5.25 - 2.8(tbd ) lamp on = high v on/off b/l on/off control a 5.5 5.0 - v br -a(max) = 3.3v i bl input current unit value condition symbol parameter note : 1. the specified current and power consumption are under the typical supply input v oltage, 24.0v. after 2hr aging with vbr-a =1.65v & vbr-b=3.3v. 2. brightness control. this v br- b voltage control brightness. 3. specified values are for a single lamp which is aligned horizontally. the life time is determined as the time at which brightness of the lamp is 50% compar ed to that of initial value at the typical lamp current ( v br Ca =1.65v) on condition of continuous operating at 25 2 c. minimum brightness.(20%) 0v maximum brightness (100%) 3.3v function v br- b voltage www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 8 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 table 3. module connector(cn1) pin configuration 3-2-1. lcd module 3-2. interface connections this lcd module employs two kinds of interface connection, a 30-pin connector is used for the module electronics and one 14-pin connectors are used for the integral backlight system. lvds receiver signal(+) rd+ 25 lvds receiver signal(-) rd- 24 ground gnd 23 lvds receiver clock signal(+) rclk+ 22 lvds receiver clock signal(-) rclk- 21 lvds receiver signal(-) rb- 15 ground gnd 14 lvds receiver signal(+) ra+ 13 lvds receiver signal(-) ra- 12 ground gnd 11

28 ground gnd 29 3 ground gnd 30 power supply +12.0v vlcd 2 power supply +12.0v vlcd 3 power supply +12.0v vlcd 4 ground gnd 5 ground gnd 6 ground gnd 7 ground gnd 8 1 select lvds data format select 9 2, page 29 ! " # ! $ 10 lvds receiver signal(+) rb+ 16 ground gnd 17 lvds receiver signal(-) rc- 18 lvds receiver signal(+) rc+ 19 ground gnd 20 ground gnd 26

%& 27 note description symbol pin no. vlcd power supply +12.0v 1 note: 1. if the pin no. 9 is ground, interface format is lg, and if the pin no. 9 is vcc(3.3v), interface format is dism. see page 9 and 10. 2. when #10 pin is no connection, dcr is disabled. 3. the pin no. 30 is necessary for lcd test. when lvds signals are abnormal operation more than 3-vsync times and power 12v is supplied, open or vcc : lcd operate itself some test patterns.(agp C auto generat ion pattern) ground : lcd operate itself a black pattern. (nsb C no signal black) lpl recommend ground for nsb. 4. all gnd (ground) pins should be connected together, which should be also connected to the lcd modules metal frame. 5. all v lcd (power input) pins should be connected together. 6. input levels of lvds signals are based on the iea 664 standard. - lcd connector(cn1) : fi-x30ssl-hf or equivalent (manufactured by jae) - mating connector : fi-x30c2l or equivalent (manufactured by jae) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 9 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 note: 1. the lcd module uses a 100 ohm [ ] resistor between positive and negative lines of each receiver input. 2. refer to lvds transmitter data sheet for detail descriptions. (ds90c385 or compatible ) 3. 7 means msb and 0 means lsb at r,g,b pixel data. red0 red1 red2 red3 red4 red5 red6 red7 green0 green1 green2 green3 green4 green5 green6 green7 blue0 blue1 blue2 blue3 blue4 blue5 blue6 blue7 hsync vsync data enable clock host system 24 bit txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ txout3- txout3+ 51 52 54 55 56 3 50 2 4 6 7 11 12 14 8 10 15 19 20 22 23 24 16 18 27 28 30 31 ds90c385 or compatible 12 13 15 16 18 19 21 22 24 25 9 30 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ rxin3- rxin3+ lg / dism lcd test 100 100 100 100 100 48 47 46 45 42 41 40 39 38 37 fi-x30ssl-hf timing controller lcd module table 4. required signal assignment for lvds transmitter ( pin9=l or open ) gnd gnd www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 10 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 table 5. required signal assignment for lvds transmitter ( pin9=h ) red0 red1 red2 red3 red4 red5 red6 red7 green0 green1 green2 green3 green4 green5 green6 green7 blue0 blue1 blue2 blue3 blue4 blue5 blue6 blue7 hsync vsync data enable clock host system 24 bit txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ txout3- txout3+ ds90c385 or compatible 12 13 15 16 18 19 21 22 24 25 9 30 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ rxin3- rxin3+ lg / dism lcd test 100 100 100 100 100 48 47 46 45 42 41 40 39 38 37 fi-x30ssl-hf timing controller lcd module vcc gnd 50 2 51 52 54 55 56 3 8 10 4 6 7 11 12 14 16 18 15 19 20 22 23 24 27 28 30 31 note: 1. the lcd module uses a 100 ohm [ ] resistor between positive and negative lines of each receiver input. 2. refer to lvds transmitter data sheet for detail descriptions. (ds90c385 or compatible ) 3. 7 means msb and 0 means lsb at r,g,b pixel data. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 11 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 3-2-2. backlight inverter the inverter connector is 20022wr-14b1 side entry type (manufactured by yeonho) or equivalent the pin configuration for the 14 pin connector is shown in the table below. table 5. inverter connector pin configulation 1. connector 1) connector(receptacle) : 20022wr-14b1 (yeonho) 2) mating connector(plug) : phr14 (jst) & phr12 (jst) pcb 14 1 12 1 pcb 0v : 90% (min) 1.65v : 100% (typ) 3.3v : 110% (max) open(nc) : 1.65v dont care analog dimming voltage for pwm amplitude control v br -a 11 on : 2.8 ~ 5.25v off : 0.0 ~ 0.8v dont care backlight on/off control v on/off 12 24v power input 24v power input v bl 1 no pin no pin ground ground ground ground ground 24v power input 24v power input 24v power input 24v power input slave(cn3) 3.0v to 5.0v output (normal), 0v to 0.7v output (abnormal) 0v : 20% (min) 3.3v : 100% (max) 24v power input v bl 3 24v power input v bl 2 status v br -b gnd gnd gnd gnd gnd v bl v bl symbol signal assignment using status output burst dimming voltage for pwm duty control ground ground ground ground ground 24v power input 24v power input master(cn2) note 7 14 13 10 9 8 6 5 4 pin www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 12 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 3-3. signal timing specifications this is the signal timing required at the input of the lvds transmitter. all of the interface signal timing should be satisfied with the following specification for its proper operation. table 7. timing table lines 1063 790 775 t vt total clks 1840 1528 1446 t ht total 295 768 63 474 1366 53 80 max. 22 768 60 162 1366 47.4 72.3 typ. 7 768 47 80 1366 39 63 min. note unit symbol item lines t vt -t vv blank pal : 47~53hz, ntsc : 57~63hz hz f v frequency vsync lines t vv display valid clks clks khz mhz t ht- t hv t hv f h f clk blank display valid frequency frequency hsync clock note : 1. the input of hsync & vsync signal does not have an effect on normal operation(de only mode). if you use spread spectrum for emi, add some additional clock to minimum value for clock margin. 2. the performance of the electro-optical characteristics may be influenced by var iance of the vertical refresh rate and the horizontal frequency. 3. timing should be set based on clock frequency. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 13 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 0.7vdd 0.3vdd t clk invalid data valid data invalid data invalid data invalid data pixel 0,0 pixel 2,0 pixel 1,0 pixel 3,0 de(data enable) valid data 0.5 vdd t hp t hbp t hv t hfp t vp t wv t vbp t vv t vfp hsync vsync de(data enable) de(data enable) dclk first data second data hsync, vsync, de, data t wh 3-4. signal timing waveforms www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 14 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 table 8. color data reference note : users should be input true 8 bit data streams via lvds transmitter. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (000) dark green 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 green (001) ... ... ... ... 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (000) dark red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (001) ... ... ... ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 red (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red (255) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (001) ... ... ... ... 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (254) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (255) blue (000) dark white yellow magenta cyan blue (255) green (255) red (255) black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue msb lsb green msb lsb red msb lsb b7 b6 b5 b4 b3 b2 b1 b0 g7 g6 g5 g4 g3 g2 g1 g0 r7 r6 r5 r4 r3 r2 r1 r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data 3-5. color data reference the brightness of each primary color(red,green,blue) is based on the 8-bit gray scal e data input for the color the higher the binary input, the brighter the color. the below table provides a reference for color versus data input. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 15 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 note : 1. please avoid the floating state of interface signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply v lcd to 0v. 3. flicker would come out when power on-off(t7=1s) is tested over several ten-times. 4. the case when the t2/t5 exceed maximum specification, it operates protection pattern(black pattern) till valid signal inputted. there is no reliability pro blem. 5. the t3/t4 is recommended value, the case when failed to meet a minimum specification, abnormal display would be shown. there is no reliability problem. 6. if the on time of option signal(dism or dcr_enable) precedes the on time of pow er(v lcd ), check the lcd logic power(vcc) is under 0.8v, otherwise it will be happened abnor mal display. 3-6. power sequence 3-6-1. lcd driving circuit interface signal (tx) power for lamp power supply for lcd v lcd 10% 0v 90% 90% 10% t 1 t 2 t 5 t 6 t 7 t 3 t 4 valid data lamp on t 8 t 9 option signal (dism, dcr_enable) ms 300 - - t6 s - - 1.0 t7 ms 0 < t9 < t5 t9 ms 0 < t8 < t2 t8 ms 50 - 0.5 t2 ms ms - - 200 t3 - - 200 t4 ms 50 - 0.5 t5 ms 20 - 0.5 t1 max typ min unit value parameter table 9. power sequence www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 16 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 3-6-2. on/off for inverter power supply for inverter v bl v bl 3-6-3. deep condition for inverter v br -b : v br -b has the same sequence with v br -a. v bl : 24v note : 1. t1 describes rising time of 0v to 24v and is not applied at restarti ng time. 2. when v bl (24v) is supplied always, there is no reliability problem. 3. t3(max) is less than t2. 4. for 1 second after lamp on, v br -b should be max level(3.3v) and v br -a is recommended 1.65v. table 10. power sequence for inverter v on/off v br -a v br -b 10% 0v 90% t 1 t 2 t 3 t 2 0.7v t 4 24v (typ.) t 5 lamp on t 4 t7 1000ms (min) 1000ms (min) v bl v bl (typ) x 0.8 ms 10 - - t6 ms - - 1000 t7 - ms - - 10 t5 3 ms 0 t4 2 1 remarks ms - - 500 t2 ms - - 200 t3 ms - - 20 t1 max typ min units values parameter www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 17 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 table 11. optical characteristics ta= 25 2 c , v lcd =12.0v, f v =60hz, dclk=72.3mhz, v br-a =1.65v, v br-b =3.3v lcd module optical stage(x,y) pritchard 880 or equivalent 50cm fig. 1 optical characteristic measurement equipment and method 4. optical specification optical characteristics are determined after the unit has been on and for 30 minutes in a dark environment at 25 2 c. the values are specified at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . it is presented additional information concerning the measurement equipment and method in f ig. 1. 5000 3750 dcr (with ai) g to g decay time rise time 4 ms 12 8 - tr r response time 14 10 - tr d 14 8 - 6 gray scale 1 1000 750 cr contrast ratio 5p y axis, down ( =270 ) y axis, up ( =90 ) x axis, left ( =180 ) x axis, right( =0 ) - 89 85 d - 89 85 u - 89 85 l 5 degree - 89 85 r viewing angle (cr>10) white blue green red tbd gy tbd gx tbd by tbd bx 0.292 wy 0.279 wx tbd ry typ +0.03 tbd typ -0.03 rx color coordinates [cie1931] 3 1.3 white luminance variation 2 cd/m 2 500 400 l wh surface luminance, white note unit max typ min value symbol parameter www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 18 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 table 12. gray scale specification note : 1. contrast ratio(cr) is defined mathematically as : surface luminance with all white pixels contrast ratio = surface luminance with all black pixels it is measured at center 1-point. dcr is measured when dynamic cr is enabled. 2. surface luminance( l wh ) is the luminance value at center 1-point across the lcd surface 50cm from the surface with all pixels displaying white. for more information see the fig. 2. 3. the variation of surface luminance , white is defined as : white(5p) = maximum(l on1 ,l on2 , l on3 , l on4 , l on5 ) / minimum(l on1 ,l on2 , l on3 , l on4 , l on5 ) where l on1 to l on5 are the luminance with all pixels displaying white at 5 locations . for more information, see the fig. 2. 4. response time is the time required for the display to transition from g(n) t o g(m) (rise time, tr r ) and from g(m) to g(n) (decay time, tr d ). for additional information see the fig. 3. (n

100 (v br -a = 3.3v, v br -b = 3.3v) 0.02 (v br -a = 0v, v br -b = 0v) luminance [%] (typ) [ dcr ] 88.0 l239 100 l255 35.4 l159 43.9 l175 53.3 l191 64.1 l207 16.7 l111 21.6 l127 28.0 l143 75.8 l223 2.60 l47 4.90 l63 8.10 l79 12.1 l95 1.10 l31 0.32 l15 0.10 l0 luminance [%] (typ) [ normal ] gray level dcr gray scale is according to inverter dimming voltages. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 19 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 measuring point for surface luminance & measuring point for luminance variation fig. 2 the position of points for luminance measure a : h / 4 mm b : v / 4 mm h : 697.685 mm v : 392.256 mm @ h,v : active area h a v b response time is defined as the following figure and shall be measured by switching the input signal for gray(n) and gray(m). fig. 3 response time gray(m) gray(n) t r r t r d 100 90 10 0 optical response n,m = 0(black)~255(white), n product specification 20 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 fig. 4 viewing angle dimension of viewing angle range normal y e = 0 , right = 180 , left = 270 , down = 90 , up www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 21 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 392.256mm vertical hard coating(3h) anti-glare treatment of the front polarizer surface treatment 6,050 g(typ.), 6,600g(max) weight 398.4mm vertical 450.0 mm vertical 48.0 mm depth 697.685mm horizontal active display area 703.8mm horizontal bezel area 760.0mm horizontal outline dimension notes : please refer to a mechanic drawing in terms of tolerance at the next page. 5. mechanical characteristics the following items provide general mechanical characteristics. in addition, the figur es in the next page show the detail information of mechanical drawing for lcd module. table 13. mechanical characteristics www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 22 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 23 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 notes : it should be recommended that any exterior materials do not go passing up t he red area slanted. ( for example, electrical cable, system board , etc ). otherwise, it c ould cause that abnormal display happens. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 24 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 6. reliability table 14. environment test condition ta= 40 c 90%rh 240h humidity condition operation 7 0 - 14,000 feet(4267.2m) 0 - 40,000 feet(12192m) altitude operating storage / shipment 8 shock level : 100grms waveform : half sine wave, 2ms direction : x, y, z one time each direction shock test (non-operating) 6 wave form : random vibration level : 1.0grms bandwidth : 10-500hz duration : x,y,z, 10 min one time each direction vibration test (non-operating) 5 ta= 0 c 240h low temperature operation test 4 ta= 40 c 50%rh 240h high temperature operation test 3 ta= -20 c 240h low temperature storage test 2 ta= 50 c 240h high temperature storage test 1 condition test item no. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 25 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 7. international standards 7-1. safety a) ul 60065, 7 th edition, dated june 30, 2003, underwriters laboratories, inc., standard for audio, video and similar electronic apparatus. b) can/csa c22.2, no. 60065:03, canadian standards association, standard for audio, video and similar electronic apparatus. c) iec60065:2001, 7 th edition cb-scheme and en 60065:2002, safety requirements for audio, video and similar electronic apparatus.. 7-2. emc a) ansi c63.4 methods of measurement of radio-noise emissions from low-vol tage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute(ansi), 1992 b) cispr22 limits and methods of measurement of radio interface character istics of information technology equipment. international special committee on radio interference. c) en 55022 limits and methods of measurement of radio interface characteristi cs of information technology equipment. european committee for electrotechnical standardization.(cenelec), 1998 ( including a1: 2000 ) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 26 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 8. packing 8-2. packing form a) package quantity in one box : 6 pcs b) box size : 848mm(w) x 494mm(d) x 539mm(h) 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f : factory code g ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan 3. factory code c nanjing p paju mark factory code k gumi b) location of lot mark serial no. is printed on the label. the label is attached to the backside of the lcd module. this is subject to change without prior notice. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 27 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 please pay attention to the followings when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted str ess) is not applied to the module. and the case on which a module is mounted should have sufficient strength so that ex ternal force is not transmitted directly to the module. (3) please attach the surface transparent protective plate to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter caus es circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anyt hing harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmet ics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzine. normal-hexane is recommended for cleaning the adhesiv es used to attach front / rear polarizers. do not use acetone, toluene and alcohol because the y cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possible. their long time contac t with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than f ollowing voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature, it becomes lower .) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperature change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a long time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromag netic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimized the interference. (7) please do not give any mechanical and/or acoustical impact to lcm. otherwise, lcm cant be operated its full characteristics perfectly. (8) a screw which is fastened up the steels should be a machine screw. (if not, it causes metallic foreign material and deal lcm a fatal blow) (9) please do not set lcd on its edge. 9. precautions www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 28 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 since a module is composed of electronic circuits, it is not strong to elect rostatic discharge. make certain that treatment persons are connected to ground through wrist band etc. and dont touch interf ace pin directly. 9-3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 9-4. precautions for strong light exposure when storing modules as spares for a long time, the following precautions are necessary . (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. 9-5. storage 9-6. handling precautions for protection film (1) the protection film is attached to the bezel with a small masking tape . when the protection film is peeled off, static electricity is generated between t he film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion- blown equipment or in such a condition, etc. (2) when the module with protection film attached is stored for a long time, someti mes there remains a very small amount of glue still on the bezel after the protection film is peeled off. (3) you can remove the glue easily. when the glue remains on the bezel surface or its v estige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamoi s soaked with normal- hexane. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 29 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 ? the attached figure of the ai_enable circuit block diagram on the control pcb assy fig. the ai_enable circuit block diagram ai_enable (user cnt #10 pin) vcc 100 60k 3k inside the timing controller on the control pcb assy www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 30 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 lc320w01sl22 packing assy # appendix- a- 1 / 4 paper_dw3 box 6 opp 70mmx300m tape 7 yupo paper 100x100 label 8 eps packing, top r_l 5 eps packing, bottom 4 masking 20mm x 50m tape 3 al bag 2 lcd module 1 material description no. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 31 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 lc320w01-sl22 pallet assy # appendix- a- 2 / 4 box quantity per pallet: 2ea pallet size: l1040 x w900 x h740 pallet gross weight: 113.0kg pp band 6 steel clip, band 7 opp tape 5 paper label 4 paper (dw3) aangle, packing 3 paper pallet 2 packing assy 1 material description no. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 32 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 a- 3 / 4 lcm label # appendix- model serial no. ul, tuv mark lpl logo us patent no. origin (sl)(a1) 8 serial no. (see cas 26page for more information) 1 2 3 4 5 6 7 9 10 11 12 inch m assy factory code serial no. 13 month year www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 33 / 49 lc320w01 liquid crystal display ver. 0.0 feb. 6, 2007 # appendix- 20 lc320w01 sla1 box label pallet label a- 4 / 4 rohs verified rohs verified 6 pcs 12 pcs www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LC320W01-SLA1

	To Download LC320W01-SLA1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .